The micro electric hoist is a small lifting hoist with many tricks to achieve twice the result with half the effort and ensure safe operation. Before using the micro electric hoist, please read and understand this manual carefully. The installation position of the micro electric hoist must be selected in a place that meets the requirements and is easy to operate. Regularly check whether the installation of the micro electric hoist is secure.

　　The lifting capacity of micro electric hoists is limited. Please do not overload or use when the weight of the lifted object is unclear (including lifting, embedding, diagonal pulling, diagonal lifting, etc.)! Overloading can damage micro electric hoists and steel wire ropes, increasing unsafe factors during operation. When lifting heavy objects, it is recommended to use pulleys for double rope operation, which can reduce the load acting on the steel wire rope and other main components by 50%. The micro electric hoist is designed according to the intermittent working system (S3-20% -10min). Remember to prohibit prolonged continuous use. When working, please do not "pull" the suspended object, otherwise it will increase the load on the micro electric hoist and easily overload the micro electric hoist and steel wire rope.

　　Keep the working area of the micro electric hoist clean and tidy. Do not let idle personnel approach, do not let anyone come into contact with the tensioned steel wire rope, and do not allow anyone to be under the running micro electric hoist. If the steel wire rope needs to be replaced, its model and specifications must be consistent with the original steel wire rope. When operating the wire rope, please wear thickened leather gloves and do not let the wire rope slip through your hand, otherwise the damaged part of the wire will stab your hand.

　　After the operation of the micro electric hoist, do not use your hands to directly guide the arrangement of the steel wire rope when inserting it into the rope barrel. Do not use hooks to hook the steel wire rope itself, nor do you use the steel wire rope of the micro electric hoist to tie or tie the suspended object. Otherwise, the steel wire rope may be damaged. When anchoring the suspended object, please use other suitable ropes. The limiter is designed as a safety configuration, which can ensure that the lifting circuit is automatically cut off when the hook is lifted to the limit position. Please do not use the limit switch as a travel switch. Do not use a micro electric hoist to lift people or load elevators. This micro electric hoist is not intended for lifting people. The installation position of the mini electric hoist should be selected so that the Warning sign and indicative signs are in a striking state, because it is necessary to operate correctly according to the relevant signs. Ensure that the micro electric hoist operates without any obstacles. Please do not operate the micro electric hoist while drinking alcohol, taking medication, or getting sick.

　　When working on the micro electric hoist, please do not work under or around the micro electric hoist. Please use the accessories provided with the micro electric hoist, otherwise it may put you in an unsafe state. Do not arbitrarily modify or weld the components of the micro electric hoist, otherwise it will reduce the safety of the micro electric hoist and put you in an unsafe state. When using a micro electric hoist to lift an object, it is necessary to ensure that at least 3 turns of steel wire rope are retained on the rope barrel to prevent the steel wire rope from falling off the rope barrel when subjected to excessive force