Hebei Fanggong Steel Wire Rope Electric Hoists mainly have two series: CD1 and MD1. The former is a commonly used but fast hoist, while the latter is a dual speed steel wire rope hoist. Below is a detailed introduction to the performance of steel wire rope hoists for your further understanding and convenient purchase.

　　1. The performance of the lifting and operating motors of the wire rope electric hoist should comply with the provisions of JB/T 90083.

　　2. The performance of control boxes, buttons, and limiters should comply with the provisions of JB/T 90086.

　　3. The allowable deviation of lifting speed is ± 5%. The allowable deviation of operating speed is ± 15%. The allowable deviation of lifting height should be -5%.

　　4. When conducting static load tests on the lifting mechanism of the wire rope electric hoist, it can withstand 15 times the load. After the test, each load-bearing component should have no cracks, deformation, or paint peeling, and there should be no looseness at all connections. Dynamic load test, withstand 125 times the load. The car can withstand a static load of 15 times the load, and when conducting a 1/200 hill climbing test at the rated load, the car runs without any abnormalities.