Steel wire rope is the most widely used accessory in lifting machinery and also a frequently worn component. Therefore, how to transport and unwind the purchased steel wire rope is explained in detail by Yiying below.

　　Transportation of steel wire rope: When loading the lifting rope reel, the rope can be threaded into the rope reel shaft hole or the steel pipe social order shaft hole, and then the rope buckle can be sleeved at both ends of the steel pipe. It is strictly prohibited to directly roll down from a high place. It must be slowly slid down using a transition springboard or lifted down by a crane. When handling on the ground, if it is necessary to use a pry, do not directly pry on the surface of the steel wire rope to avoid damage to the surface of the steel wire rope. Long distance transportation needs to be covered with a tarpaulin, Prevent rainwater infiltration from causing corrosion and affecting use.

　　Unwinding of steel wire rope: If it is necessary to turn over and rewind it during use, avoid causing rope twisting; If twisting occurs during unwinding, it should be stopped immediately and eliminated before proceeding. After the occurrence of kinking, the breaking force of the steel wire rope will be reduced by about 40-60% depending on the degree of kinking. The rope reel should be slowly rotated or rolled, and the steel wire rope should be slowly uncoiled to prevent twisting or loosening.

　　Steel wire ropes that have not been used for a long time should be placed in a ventilated and dry room to prevent direct sunlight and hot air baking; If it is necessary to place it outdoors, it should be placed on a high ground and covered with a rainproof cloth. The ground placed is generally raised by more than 300mm.